| 强规范条件下CO_2焊飞溅产生机理的研究 |
| |
| 引用本文： | 蒋力培,徐国成,李景昌.强规范条件下CO_2焊飞溅产生机理的研究[J].材料科学与工艺,1989(Z1). |
| |
| 作者姓名： | 蒋力培 徐国成 李景昌 |
| |
| 作者单位： | 吉林工业大学，吉林工业大学，吉林工业大学 |
| |
| 摘 要： | 本文采用自制的 CO_2焊电流波形微机控制系统、微机数据采集分析系统等先进手段,对强规范条件下的 CO_2焊飞溅生成机理等问题进行研究,得出了初步规律。实验研究分析结果表明,瞬间短路与再引燃时的电弧冲击是强规范条件下 CO_2焊飞溅的主要产生原因。研究还表明,在短路过渡开始瞬间及结束后瞬间施加电流负脉冲能明显减少 CO_2焊飞溅。
|
| 关 键 词： | CO_2焊 飞溅 机理 强规范 电流负脉冲 |
A Study of the Generative Mechanism of CO_2 Welding Spattering under the Condition of a High Current |
| |
| Jiang Lipei Xu Guocheng Li Jingchang.A Study of the Generative Mechanism of CO_2 Welding Spattering under the Condition of a High Current[J].Materials Science and Technology,1989(Z1). |
| |
| Authors: | Jiang Lipei Xu Guocheng Li Jingchang |
| |
| Affiliation: | Jilin University of Technology |
| |
| Abstract: | In this paper,the generative mcchanism of CO_2 welding spattering under the condition of a high current has been unvestigated by using a microcomputer system for controlling CO_2 welding current waves and a microcomputer system for collecting and analyzing data which were designed and made by the authors. The experimental results showed that CO_2 welding spattering is mainly caused by instantaneous shorteircuiting and are forcing during are restriking.They also showed that CO_2 welding spattering can be reduced effectively by adding negative current pulses at the moment of short circuit beginning and are re- striking. |
| |
| Keywords: | CO_2 welding spattering mechanism high current negative pulse of current |
| 本文献已被 CNKI 等数据库收录！ |
