| 基于Pro/E的全摆线齿轮参数化设计 |
| |
| 引用本文： | 刘令涛,王建华.基于Pro/E的全摆线齿轮参数化设计[J].北京机械工业学院学报,2011(6):82-85. |
| |
| 作者姓名： | 刘令涛 王建华 |
| |
| 作者单位： | 北京信息科技大学机电工程学院,北京100192 |
| |
| 基金项目： | 北京市属高等学校人才强教深化计划资助项目（PHR200906213;PHR201007234）; 北京信息科技大学校基金（5026010911） |
| |
| 摘 要： | 针对全摆线齿轮三维建模工作的复杂和繁琐,且修改不便的问题,根据全摆线齿轮的自身特性,利用Pro/E软件的特征建模和参数化建模技术,建立了内啮合全摆线直齿轮和斜齿轮的三维模型,实现了全摆线齿轮的参数化设计,减少了全摆线齿轮的重复建模工作,提高了全摆线齿轮的设计效率,为后期齿轮传动系统的虚拟装配、有限元分析等工作打下了基础。
|
| 关 键 词： | 全摆线 齿轮 建模 参数化设计 |
Parametric design of whole cycloid gear based on Pro/E |
| |
| LIU Ling-tao,WANG Jian-hua.Parametric design of whole cycloid gear based on Pro/E[J].Journal of Beijing Institute of Machinery,2011(6):82-85. |
| |
| Authors: | LIU Ling-tao WANG Jian-hua |
| |
| Affiliation: | (School of Eleetromechanical Engineering,Beijing Information Science and Technology University,Beijing 100192 China) |
| |
| Abstract: | The 3D model of whole cycloid gear is more complex and tedious,and is also inconvenient to modify.This design method establishes the 3D models of internal meshing whole cycloid spur and helical gears by using the features of whole cycloid gear,the feature modeling and parametric modeling techniques of Pro/E software.The parametric design of whole cycloid gear is realized,which can reduce the repeatability modeling of the whole cycloid gear and greatly improve the design efficiency of whole cycloid gear.It lays foundation for virtual assembly and finite element analysis of gear drive system in later period. |
| |
| Keywords: | whole cycloid gear model parametric design |
| 本文献已被 维普 等数据库收录！ |
|
