| 螺旋肋钢丝“缩径”现象分析 |
| |
| 引用本文： | 于全文. 螺旋肋钢丝“缩径”现象分析[J]. 金属制品, 2000, 26(1): 22-24 |
| |
| 作者姓名： | 于全文 |
| |
| 作者单位： | 唐山钢铁集团劳动实业公司,063016 |
| |
| 摘 要： | 螺旋肋钢丝在拉拔过程中有005～015mm的缩径。经分析有的缩径由工艺缺陷导致;有的则是人为造成的。应严加控制以防止成材率下降和力学性能降低。
|
| 关 键 词： | 螺旋肋钢丝 缩径 塑性变形 |
| 修稿时间： | 1999-08-23 |
Analysis of Diameter-shrinking Phenomena on Spiral Steel Wire |
| |
| Yu Quanwen. Analysis of Diameter-shrinking Phenomena on Spiral Steel Wire[J]. Steel Wire Products, 2000, 26(1): 22-24 |
| |
| Authors: | Yu Quanwen |
| |
| Affiliation: | The Industry Co of Tangshan Iron and Steel Group Co 063016 |
| |
| Abstract: | In the drawing process there were 0 05～0 15?mm diameter shrinking phenomena happened in the products which were caused by either process defects or man made defects and will decrease the useful product rate and lower the physical properties if not well controlled |
| |
| Keywords: | spiral steel wire diameter shrinking plastic deformation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
