| 40CrNiMoA钢激光相变硬化技术 |
| |
| 引用本文： | 石岩,徐春鹰,张宏.40CrNiMoA钢激光相变硬化技术[J].金属热处理,2002,27(11):16-18. |
| |
| 作者姓名： | 石岩 徐春鹰 张宏 |
| |
| 作者单位： | 长春理工大学,机械系,激光加工室,长春,130022 |
| |
| 基金项目： | 国防科技预研跨行业综合技术项目 |
| |
| 摘 要： | 研究了40CrNiMoA钢激光淬火工艺参数与硬化层深度及硬度之间的相互关系，以及淬硬层微观结构特征。结果表明，随着光斑扫描速度的提高，硬化层深度降低，表面硬度存在一个极大值；随着激光功率的升高，硬化层深度增加，表面硬度也存在一个极大值，激光淬火硬化层依其组织特征，分为完全淬硬区，过渡区及高温回火区。
|
| 关 键 词： | 40CrNiMoA钢 激光相变硬化 激光淬火 工艺参数 显微组织 |
| 文章编号： | 0254-6051(2002)11-0016-03 |
Laser Hardening Technology for 40CrNiMoA Steel |
| |
| SHI Yan,XU Chun ying,ZHANG Hong.Laser Hardening Technology for 40CrNiMoA Steel[J].Heat Treatment of Metals,2002,27(11):16-18. |
| |
| Authors: | SHI Yan XU Chun ying ZHANG Hong |
| |
| Abstract: | Effects of the laser hardening process parameters on the hardening depth,the hardness and the microstructure of the hardened layer of steel 40CrNiMoA were studied in this paper.The results show that with the increase of the scanning speed of the laser beam,the depth of the hardened case decrease and the surface hardness has a maximum value,with the increase of laser power,the depth of the hardened case increase and the surface hardness has a maximum value,according to the microstructure characteristic,the laser hardened layer can been divided into three zones:completely hardened zone,transition zone and tempered zone. |
| |
| Keywords: | laser hardening process parameters microstructure |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
