| 改性高密度聚乙烯的形变回复性能研究 |
| |
| 引用本文： | 刘铁民 张广成 陈挺 顾军渭 李颖 项士新 缪桦. 改性高密度聚乙烯的形变回复性能研究[J]. 中国塑料, 2005, 19(6): 35-40 |
| |
| 作者姓名： | 刘铁民 张广成 陈挺 顾军渭 李颖 项士新 缪桦 |
| |
| 作者单位： | 西北工业大学理学院应用化学系 陕西西安710072(刘铁民，张广成，陈挺，顾军渭，李颖，项士新)，西北工业大学理学院应用化学系 陕西西安710072(缪桦) |
| |
| 摘 要： | 通过共混与交联的方法制备高密度聚乙烯(PEHD)/橡胶改性材料,研究了其形变回复性能。结果表明:橡胶含量为15%时的PEHD/橡胶改性材料24h的形变回复能力均有提高,PEHD/NR从纯PEHD的81.33%提高到89.33%;硫化PEHD/NR体系比硫化前提高了1.6%;PEHD/天然橡胶(NR)、PEHD/丁腈橡胶(NBR)和PEHD/三元乙丙橡胶(EPDM)三种共混体系的24h形变回复率分别为:89.33%、87.73%和86.67%;在PEHD的熔点附近,交联聚乙烯(PEXL)和PEHD/硫化橡胶共混体系是典型的形状记忆材料,易发生300%以上的形变,形变的长时间保持率大于99%,并可以在10min内,发生95%以上形变回复。
|
| 关 键 词： | 改性 高密度聚乙烯 形变回复 性能 机理 |
Study on Deformation Recovery of Modified PE-HD |
| |
| LIU Tie-min,ZHANG Guang-cheng,CHEN Ting,GU Jun-wei,LI Ying,XIANG Shi-xin,MIAO Hua. Study on Deformation Recovery of Modified PE-HD[J]. China Plastics, 2005, 19(6): 35-40 |
| |
| Authors: | LIU Tie-min ZHANG Guang-cheng CHEN Ting GU Jun-wei LI Ying XIANG Shi-xin MIAO Hua |
| |
| Abstract: | The deformation recovery of rubber modified PE-HD prepared via blending and crosslinking was studied. It showed that 15wt % of rubber may effectively increase the 24 h deformation recovery. The blends of PE-HD with NR, NBR, and EPDM achieved a deformation recovery of 89.33 %,87.73 %, and 86.67 %, respectively, which in contrast with 81.33 % for neat PE-HD. Crosslinking may increase the value of PE-HD/NR system by 1.6 %. Crosslinked PE-HD/NR showed also shape memory behaviors. It was easy to be elongated to 300 % and kept there for a long time with size change lower than 1 %. The original dimension could be recovered in 10 min at higher temperatures near melting point of PE-HD. |
| |
| Keywords: | modification high density polyethylene deformation recovery property mechanism |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
