| 薄壁件多道缩口模的设计及工艺 |
| |
| 引用本文： | 叶凯. 薄壁件多道缩口模的设计及工艺[J]. 模具工业, 2002, 0(12): 29-31 |
| |
| 作者姓名： | 叶凯 |
| |
| 作者单位： | 漳州国际铝容器有限公司,福建,漳州,363000 |
| |
| 摘 要： | 以整体缩口模为例 ,分析了薄壁圆筒形工件多道缩口模凹模、模芯的设计要点 ,介绍了工件在缩口加工过程中的充气及真空传递过程 ,并对工件的缩口工艺进行了分析。
|
| 关 键 词： | 多道缩口 薄壁圆筒工件 凹模 模芯 |
| 文章编号： | 1001-2168(2002)12-0029-03 |
| 修稿时间： | 2002-03-27 |
The Design and Technology of the Multi Necking Die for the Thin-Wall Part |
| |
| YE Kai. The Design and Technology of the Multi Necking Die for the Thin-Wall Part[J]. Die & Mould Industry, 2002, 0(12): 29-31 |
| |
| Authors: | YE Kai |
| |
| Abstract: | With a whole necking die as an example, the main points for designing the matrix and core of the multi necking die for the thin_wall cylinder part were analyzed. The air filling and vacuum transferring processes in the course of part necking were introduced. And the necking process of the part was analyzed. |
| |
| Keywords: | multi necking thin_wall cylinder part matrix die core |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
