| 塑壳式断路器中电磁脱扣器的分析与优化 |
| |
| 引用本文： | 刘金鹿,苏秀苹,任俊勇,葛晓明.塑壳式断路器中电磁脱扣器的分析与优化[J].低压电器,2010(21):1-4,8. |
| |
| 作者姓名： | 刘金鹿 苏秀苹 任俊勇 葛晓明 |
| |
| 作者单位： | 河北工业大学电器研究所,天津300130 |
| |
| 基金项目： | 河北省自然科学基金资助重大项目 |
| |
| 摘 要： | 介绍了目前低压断路器研究方法。运用三坐标测量机和建模软件对脱扣器的各个部件进行测量、建模,并对建模过程的关键问题进行描述。重点对塑壳断路器电磁脱扣器进行了电磁分析和动力学分析,通过采用不同的仿真软件进行对比来验证分析结果。运用仿真数据对电磁线圈进行了优化。
|
| 关 键 词： | 电磁脱扣器 建模 仿真 分析 |
Analysis and Optimization of Electromagnetic Release for Moulded Case Circuit Breaker |
| |
| LIU Jinlu,SU Xiuping,REN Junyong,GE Xiaoming.Analysis and Optimization of Electromagnetic Release for Moulded Case Circuit Breaker[J].Low Voltage Apparatus,2010(21):1-4,8. |
| |
| Authors: | LIU Jinlu SU Xiuping REN Junyong GE Xiaoming |
| |
| Affiliation: | (Apparatus Research Institute,Hebei University of Technology,Tianjin 300130,China) |
| |
| Abstract: | The research methods of low voltage circuit breaker were described.The various component of release were measured and modeled by coordinate measuring machine and modeling software,and the key issues of the modeling process were described.The electromagnetic and dynamics analysis of electromagnetic release in moulded case circuit breaker were selectively made.The analysis results were verified by comparing different simulation softwares.Using simulation datas,the electromagnetic coil was optimized. |
| |
| Keywords: | electromagnetic release modeling simulation analysis |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
