Direct coagulation casting of YSZ powder suspensions using MgO as coagulating agent

Direct coagulation casting (DCC) of aqueous 8 wt% yttria stabilized zirconia (YSZ) powder suspensions prepared using ammonium poly(acrylate) dispersant has been studied using MgO as coagulating agent. Small amount (<0.1 wt% based on YSZ) of MgO powder dispersed in the YSZ powder suspension at ∼5 °C set the suspension in to stiff wet-coagulated body when exposed to room temperature (30 °C) due to the reaction between ammonium poly(acrylate) and MgO. MgO concentration equivalent to react with dispersant did not coagulate the YSZ powder suspension though it precipitate the whole ammonium poly(acrylate) dispersant as Mg-poly(acrylate). This is because of the ability of the YSZ powder to disperse in water at alkaline pH (∼9.5) without any dispersant by electrostatic mechanism. The YSZ powder suspensions form stiff coagulated bodies at MgO concentration double or more of the equivalent amount required for reacting with the dispersant. Setting of the YSZ powder suspension is due to the heterocoagulation of the YSZ particles and MgO particles added in excess of the equivalent amount to react with the dispersant, having opposite surface charges. The wet-coagulated body showed relatively high compressive yield strength (155 kPa) and Young’s modulus (3.1 MPa). The green bodies prepared by humidity controlled drying of the wet-coagulated bodies sintered to >98% TD at 1550 °C.