| HGB/TPU复合泡沫材料的制备及泡孔结构研究 |
| |
| 引用本文： | 林佩洁,邵群,路瑶,王依民.HGB/TPU复合泡沫材料的制备及泡孔结构研究[J].合成技术及应用,2012,27(4):5-9. |
| |
| 作者姓名： | 林佩洁 邵群 路瑶 王依民 |
| |
| 作者单位： | 1. 东华大学材料科学与工程学院,上海,201620
2. 东华大学纤维材料改性国家重点实验室,上海,201620 |
| |
| 摘 要： | 采用空心玻璃微珠（HGB）填充热塑性聚氨酯（TPU）,制备了HGB/TPU复合泡沫材料。研究了硅烷偶联剂KH550对HGB的表面处理,并借助SEM探讨了不同发泡方式、发泡剂含量、HGB含量对复合泡沫材料微观形态结构的影响。结果表明：经KH550处理的HGB与TPU基体界面结合良好;通过注塑发泡得到的泡沫材料发泡效果较好;当发泡剂含量为1%、HGB含量为2%时复合泡沫材料的泡孔分布均匀,尺寸较为均一。
|
| 关 键 词： | 热塑性聚氨酯 空心玻璃微珠 发泡剂 复合泡沫 泡孔结构 |
The preparation and cell structure study of HGB/TPU composite foam material |
| |
| Lin Peijie,Shao Qun,Fredrick Nzioka Mutua,Lu Yao,Wang Yimin.The preparation and cell structure study of HGB/TPU composite foam material[J].Synthetic Technology and Application,2012,27(4):5-9. |
| |
| Authors: | Lin Peijie Shao Qun Fredrick Nzioka Mutua Lu Yao Wang Yimin |
| |
| Affiliation: | 1.College of Material Science and Engineering,Donghua University,Shanghai 201620,China; 2.State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, Donghua University,Shanghai 201620,China) |
| |
| Abstract: | HGB/TPU composite foam material was manufactured by filling thermoplastic polyurethane（TPU） with hollow glass beads（HGB）.The effect of silane coupling agent KH550 used as a surface modification agent to treat HGB,with the help of SEM,effects of foaming ways,the content of foaming agent and the content of HGB on micro-morphology of the composite foam were investigated.The results showed that the interface combination between KH550 modified HGB and TPU was enhanced.In addition,better foaming effect was achieved by injection foaming,and composites with evenly-distributed bubble holes and relatively homogeneous size were manufactured while adding 1% of foaming agent and 2% of HGB. |
| |
| Keywords: | thermoplastic polyurethane（TPU） hollow glass bead（HGB） foaming agent composite foam cell structure |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
