首页 | 本学科首页   官方微博 | 高级检索  
     

尿素嵌入法生产纤维素氨基甲酸酯新工艺
引用本文:哈丽丹·买买提,吾满江·艾力. 尿素嵌入法生产纤维素氨基甲酸酯新工艺[J]. 纤维素科学与技术, 2006, 14(2): 35-39,45
作者姓名:哈丽丹·买买提  吾满江·艾力
作者单位:1. 新疆大学化学化工学院,新疆,乌鲁木齐,830046
2. 中国科学院新疆理化研究所,新疆,乌鲁木齐,830011
基金项目:国家科技部“西部开发”重大项目(2004BA901A22)
摘    要:以纤维素浆粕及尿素为原料,在二甲苯体系中于135~140℃反应制取纤维素氨基甲酸酯。通过实验考察了各种工艺参数,结果显示:当原料活化用氢氧化钠溶液浓度为14%~16%,活化温度为40~50℃,活化时间为30~40 min,尿素与纤维素的质量比为2~3︰1,合成反应时间为2~3h时,产品纤维素氨基甲酸酯可在氢氧化钠溶液中形成良好的稳定的溶液且具有良好的过滤性和可纺性。

关 键 词:纤维素纤维  纤维素氨基甲酸酯  粘胶纤维
文章编号:1004-8405(2006)02-0035-06
修稿时间:2005-06-12

Novel Process for Manufacturing Cellulose Carbamate
Halidan MAMAIT,Wumanjiang ELI. Novel Process for Manufacturing Cellulose Carbamate[J]. Journal of Cellulose Science and Technology, 2006, 14(2): 35-39,45
Authors:Halidan MAMAIT  Wumanjiang ELI
Abstract:A Novel process for manufacturing cellulose carbamate—a new raw material which possesses meaning of environmental protection is presented in this paper.Cellulose pulp is preliminarily activated by alkaline,and then the activated cellulose pulp is reacted with urea in xylene at a temperature in the range of 135 to 140℃.All factors affecting the function of dissolving、filtration and spinning of the products were investigated.The technological conditions were determined that the pretreatment of cellulose pulp took place in 14%~16% NaOH solution for 30~40 min at 40~50℃ and the reaction was carried out at 135~140℃ for 2~3 h with the mass ratio of urea to microcrystalline cellulose 2~3∶1.
Keywords:cellulose fiber  cellulose carbamate  viscose fiber
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号