| 脉动压力诱导注射时螺杆功率特性分析 |
| |
| 引用本文： | 王权,瞿金平. 脉动压力诱导注射时螺杆功率特性分析[J]. 材料科学与工艺, 2008, 16(4): 458-462 |
| |
| 作者姓名： | 王权 瞿金平 |
| |
| 作者单位： | 1. 工程教育部重点实验室,广州,510640
2. 华南理工大学聚合物新型成型装备国家工程研究中心聚合物成型加工 |
| |
| 基金项目： | 国家自然科学基金，国家自然科学基金 |
| |
| 摘 要： | 为了探讨动态成型工艺参数对注射时螺杆功率消耗的影响规律,采用自行修正的Tanner本构方程研究了动态注射过程中螺杆功率消耗对振动力场的响应,建立了振动力场作用下注射过程螺杆功率消耗的理论模型.从理论上分析了动态注射过程中,螺杆上的功率消耗变化情况,并给出了解析解.研究表明,在施加轴向振动的情况下,螺杆上的功率消耗明显降低,并且随着振动强度的增强,降低的幅度增大.
|
| 关 键 词： | 振动力场 注射 Tanner本构方程 螺杆 功率特性 |
Analysis on power characteristic of screw under pulsing-pressure-induced injection molding |
| |
| WANG Quan,QU Jin-ping. Analysis on power characteristic of screw under pulsing-pressure-induced injection molding[J]. Materials Science and Technology, 2008, 16(4): 458-462 |
| |
| Authors: | WANG Quan QU Jin-ping |
| |
| Affiliation: | (The National Engineering Research Center of Novel Equipment for Polymer Processing,The KeyLaboratory of Polymer Processing Engineering of Ministry of Education,South ChinaUniversity of Technology,Guangzhou 510640,China) |
| |
| Abstract: | In order to explore the rule of a screw’s power consumption in an injection process influenced by dynamic injection molding technical parameters,the response of power consumption of a screw in a dynamic injection to the vibration force field(VFF) was studied with self-amended Tanner constitutive equations.Theoretical models of power consumption of the screw in injection under VFF were established.The change of screw’s power consumption in the dynamic injection was studied in theory and the analytical solution was presented in VFF.Results were deduced that the power consumption dropped while the axial vibration was applied,and the decline range increased with the enhancement of vibration strength. |
| |
| Keywords: | vibration force field injection Tanner constitutive equations screw power characteristic |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
