| 基于Moldflow和UG的手机前盖模具设计 |
| |
| 引用本文： | 曹轶杰,陈进武,张文凤,邓勇德. 基于Moldflow和UG的手机前盖模具设计[J]. 塑料工业, 2020, 48(1): 46-50 |
| |
| 作者姓名： | 曹轶杰 陈进武 张文凤 邓勇德 |
| |
| 作者单位： | 桂林航天工业学院机械工程学院,广西桂林541004;桂林航天工业学院机械工程学院,广西桂林541004;桂林航天工业学院机械工程学院,广西桂林541004;桂林航天工业学院机械工程学院,广西桂林541004 |
| |
| 基金项目： | 广西教育厅科研项目(项目编号:KY2015YB341) |
| |
| 摘 要： | 根据手机前盖的结构特点和质量要求,运用Moldflow软件对产品浇注系统、冷却系统进行优化设计。通过正交试验,分析了注射工艺参数对产品体积收缩率和翘曲变形的影响规律,得到优化注射工艺方案。根据Moldflow分析结果,利用UG软件完成产品的模具设计。
|
| 关 键 词： | 手机前盖 Moldflow 正交试验 模具设计 |
Design of Injection Mold for Mobile Phone Cover Based on UG and Moldflow Softwares |
| |
| Yi-jie,CHEN Jin-wu,ZHANG Wen-feng,DENG Yong-de. Design of Injection Mold for Mobile Phone Cover Based on UG and Moldflow Softwares[J]. China Plastics Industry, 2020, 48(1): 46-50 |
| |
| Authors: | Yi-jie CHEN Jin-wu ZHANG Wen-feng DENG Yong-de |
| |
| Affiliation: | (Department of Mechanical Engineering,Guilin University of Aerospace,Guilin 541004,China) |
| |
| Abstract: | According to the structural characteristics and quality requirements of mobile phone cover,the pouring system and cooling system were optimized and designed using moldfow software.Through the orthogonal test,the influence of injection process parameters on volume shrinkage and warpage of product were analyzed and the optimization injection process plan were obtained.The mold design of the product was completed using UG software according to the results of the moldflow analysis. |
| |
| Keywords: | Mobile Phone Shell Moldflow Orthogonal Test Mold Design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
