| 基于Pro/Engineer二次开发的带传动参数化CAD |
| |
| 引用本文： | 钟启,李潇波,邱清盈,潘双夏. 基于Pro/Engineer二次开发的带传动参数化CAD[J]. 轻工机械, 2006, 24(1): 69-72 |
| |
| 作者姓名： | 钟启 李潇波 邱清盈 潘双夏 |
| |
| 作者单位： | 浙江大学机械设计研究所,浙江,杭州,310027;浙江大学机械设计研究所,浙江,杭州,310027;浙江大学机械设计研究所,浙江,杭州,310027;浙江大学机械设计研究所,浙江,杭州,310027 |
| |
| 基金项目： | 国家高技术研究发展计划(863计划);国家科技攻关项目 |
| |
| 摘 要： | 以三维CAD软件P ro/E为二次开发平台,采用VC 6.0研制了带传动的三维参数化设计系统。探讨了系统实现中的设计资料程序化处理、三维参数化建模、带轮设计、模型驱动等技术问题。该系统可以显著提高带传动设计的效率和精度,提出的设计过程和方法可以为其他机械零件的计算机辅助设计提供参考。
|
| 关 键 词： | 带传动设计 Pro/Engineer 参数化设计 |
| 文章编号： | 1005-2895(2006)01-0069-04 |
| 收稿时间： | 2005-01-06 |
| 修稿时间： | 2005-01-06 |
Parametrical CAD for Belt Transmission Based on Re-development of Pro/E |
| |
| ZHONG Qi,LI Xiao-bo,QIU Qing-ying,PAN Shuang-xia. Parametrical CAD for Belt Transmission Based on Re-development of Pro/E[J]. Light Industry Machinery, 2006, 24(1): 69-72 |
| |
| Authors: | ZHONG Qi LI Xiao-bo QIU Qing-ying PAN Shuang-xia |
| |
| Affiliation: | Mechanical Design Institute,Zhejiang University,Hangzhou 310027 |
| |
| Abstract: | In this paper,take 3D software Pro/E as re-developing platform,a 3D parametrical design system of belt transmission was developed with VC 6.0.program processing of data,3D parametric modeling,belt-pulley designing and model-driven are discussed.It greatly improves the design efficiency and accuracy of belt transmission,and also can offer some experience in development of CAD system of other mechanical products. |
| |
| Keywords: | Pro/Engineer |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
