| 复杂工况下连轧过程数值仿真系统研究 |
| |
| 引用本文： | 杜凤山,于辉,黄华贵,王敏婷,孙静娜,赵玲玲.复杂工况下连轧过程数值仿真系统研究[J].武汉冶金科技大学学报,2010(3):238-243. |
| |
| 作者姓名： | 杜凤山 于辉 黄华贵 王敏婷 孙静娜 赵玲玲 |
| |
| 作者单位： | 燕山大学机械工程学院,河北秦皇岛066001 |
| |
| 基金项目： | 国家科技支撑计划资助项目（2007BAF02B12）; 河北省自然科学基金资助项目（E2009000418） |
| |
| 摘 要： | 针对板、管、棒材连轧过程中出现的工艺制度难以确定、实验研究理论性不强等问题,以非线性有限元为内核,通过机型选择、系统仿真、工艺决策等措施,提出了确定最佳工艺制度的理论和方法。
|
| 关 键 词： | 连轧 数值仿真 连轧工艺 |
Numerical simulation of continuous rolling under complicated working conditions |
| |
| Authors: | Du Fengshan Yu Hui Huang Huagui Wang Minting Sun Jingna Zhao Lingling |
| |
| Affiliation: | (College of Mechanical Engineering,Yanshan University,Qinhuangdao 066004,China) |
| |
| Abstract: | Aimed at the question that the continuous rolling schedules of plate,pipe and bar are undeterminable and the experimental studies are unsystematic,researches on numerical simulation with nonlinear finite element as kernel are carried out.By means of type selection,continuous rolling process system simulation and technological decision-making,the theory and method of determining optimum technological system are proposed,which are of great realistic significance for the production practice of continuous rolling process. |
| |
| Keywords: | continuous rolling numerical simulation continuous rolling process |
| 本文献已被 维普 等数据库收录！ |
|
