| 带窄凸缘圆筒形零件的整形 |
| |
| 引用本文： | 彭秀兰,聂兰启,汪发春.带窄凸缘圆筒形零件的整形[J].金属成形工艺,2010(6):76-78. |
| |
| 作者姓名： | 彭秀兰 聂兰启 汪发春 |
| |
| 作者单位： | [1]包头职业技术学院,包头014030 [2]山东红旗机电有限公司,山东潍坊261031 [3]北京有色金属研究总院,北京100088 |
| |
| 摘 要： | 通过对药盒整形工艺进行了分析,介绍了工艺计算方法、模具结构及工作过程,同时,对模具主要工作部分零件的设计做了介绍,给出了生产中注意的问题。
|
| 关 键 词： | 药盒 整形 整形模 |
The Shaping of a Columnar Part with Narrow Flange |
| |
| PENG Xiu-lan,NIE Lan-qi,WANG Fa-chun.The Shaping of a Columnar Part with Narrow Flange[J].Metal Forming Technology,2010(6):76-78. |
| |
| Authors: | PENG Xiu-lan NIE Lan-qi WANG Fa-chun |
| |
| Affiliation: | 1.Baotou Vocational and Technical College,Baotou 014030,China;2.Shandong Hongqi Electromechanical Co.Ltd.,Weifang 261031,China;3.Beijing General Research Institute For Nonferrous Metals,Beijing 100088,China) |
| |
| Abstract: | Through analyzing the shaping process of a powder box the calculation of its process was introduced.The die＇s structure and working process were introduced.The design of the die＇s main working parts and problems in production were put forward. |
| |
| Keywords: | a powder box shaping shaping die |
| 本文献已被 维普 等数据库收录！ |
|
