| 汽车万向节叉热挤压成形的数值模拟分析 |
| |
| 引用本文： | 王熠昕,权国政,黄文超.汽车万向节叉热挤压成形的数值模拟分析[J].金属成形工艺,2010(6):60-63. |
| |
| 作者姓名： | 王熠昕 权国政 黄文超 |
| |
| 作者单位： | [1]重庆大学材料科学与工程学院,重庆400044 [2]重庆理工大学材料科学与工程学院,重庆400050 |
| |
| 基金项目： | 重庆大学大型仪器设备开放基金（2010011511）; 国家大学生创新性实验计划项目（091061164） |
| |
| 摘 要： | 采用刚粘塑性有限元法对万向节叉热挤压成形过程进行数值模拟分析,综合考虑了变形、热传导、变形生热、摩擦生热等多个因素,得出了成形过程中金属流动变化的3个阶段。研究了摩擦条件和终锻温度对成形力的影响,得出良好的润滑条件和给模具进行预热,能够有效的控制成形力,有利于金属的流动及提高模具寿命。
|
| 关 键 词： | 万向节叉 数值模拟 成形参数 |
Simulation Analysis of Hot Extrusion Forming for Universal Joint Fork of Automobile |
| |
| WANG Yi-xin,QUAN Guo-zheng,HUANG Wen-chao.Simulation Analysis of Hot Extrusion Forming for Universal Joint Fork of Automobile[J].Metal Forming Technology,2010(6):60-63. |
| |
| Authors: | WANG Yi-xin QUAN Guo-zheng HUANG Wen-chao |
| |
| Affiliation: | 1.School of Material Science and Engineering,Chongqing University,Chongqing 400044,China;2.School of Material Science and Engineering,Chongqing University of Technology,Chongqing 400050,China) |
| |
| Abstract: | Universal joint fork is a type of dialing fork with high forming difficulty and high quality request.The numerical simulation analysis of hot extrusion forming process of the universal joint fork was carried out using the rigid-visco-plastic finite element model.In view of formation,heat transfer,heating generation coupled process,it was found that there exist three stages for forming process of metal flow.In addition the effect of friction condition and temperature of finish-forging on the forming force was studied.Good lubricating conditions and die preheating can effectively control forming force,enhance metal flow and improve die life. |
| |
| Keywords: | universal joint fork simulation forminng parameters |
| 本文献已被 维普 等数据库收录！ |
|
