| 亚热精密成形过程模具磨损的数值模拟研究 |
| |
| 引用本文： | 李振红,黄英娜,张质良. 亚热精密成形过程模具磨损的数值模拟研究[J]. 金属成形工艺, 2010, 0(2): 5-9 |
| |
| 作者姓名： | 李振红 黄英娜 张质良 |
| |
| 作者单位： | [1]南京工程学院材料工程学院,南京211167 [2]上海交通大学模具CAD／CAM国家工程研究中心,上海200030 |
| |
| 基金项目： | 南京工程学院科研基金项目（KXJ08054） |
| |
| 摘 要： | 采用数值模拟技术分析了亚热挤压成形阶段坯料及模具上的参量变化。基于修正的磨损模型，将其引入到有限元数值模拟软件中，对亚热挤压过程中模具磨损量的变化情况进行了分析，得到了不同变形阶段的瞬时磨损曲线及一次成形结束时的综合磨损曲线。利用研究结果对模具的磨损寿命进行了预测，与实际情况对比，两者吻合较好。
|
| 关 键 词： | 亚热精密成形 模具磨损 数值模拟 |
Die Wear Simulation of Semi-hot Precision Forming Process |
| |
| LI Zhen-hong,HUANG Ying na,ZHANG Zhi-liang. Die Wear Simulation of Semi-hot Precision Forming Process[J]. Metal Forming Technology, 2010, 0(2): 5-9 |
| |
| Authors: | LI Zhen-hong HUANG Ying na ZHANG Zhi-liang |
| |
| Affiliation: | 1. Material Engineering College, Nanjing Institute of Technology, Nanjing 211167, China 2. National Die and Mold CAD Engineering Research Center, Shanghai Jiao Tong University, Shanghai 200030, China) |
| |
| Abstract: | The temperature, stress and velocity field of die and billet had been obtained by numerical simulation analysis of semi-hot extrusion. By introducing the modified wear model into the finite element numerical simulation software, die wear depth curves of different deformation stages and a forming cycle had been drawn. Using FEM simulation the life of die could be accurately predicted. All the results were in good agreement wilh actual conditions. So it is an important mean to help corporation gel low-cost and high quality product. |
| |
| Keywords: | semi-hot precision forming die wear numerical simulation |
| 本文献已被 维普 等数据库收录！ |
