| 降低帘线钢脱碳层厚度的技术研究 |
| |
| 引用本文： | 刘占增,曾汉生,丁翠娇,张道明,蒋跃东,陈鹏飞. 降低帘线钢脱碳层厚度的技术研究[J]. 武钢技术, 2005, 43(6): 12-15 |
| |
| 作者姓名： | 刘占增 曾汉生 丁翠娇 张道明 蒋跃东 陈鹏飞 |
| |
| 作者单位： | 1. 武钢技术中心,湖北,武汉,430080
2. 武钢大型厂,湖北,武汉,430083 |
| |
| 摘 要： | 针对生产帘线钢产品时出现的脱碳层厚度超标情况,通过热工测试实验,对加热炉加热过程中影响脱碳层厚度的因素进行分析,提出降低脱碳层厚度的应对措施并对空燃比进行调试,最终将大型厂帘线钢的脱碳层厚度控制在1.2%D以内。
|
| 关 键 词： | 脱碳 帘线钢 加热炉 空燃比 |
| 文章编号： | 1008-4371（2005）06-0012-04 |
| 收稿时间： | 2005-07-13 |
| 修稿时间： | 2005-07-13 |
Technology for Reduction of Thickness of Decarburization Layer in Cord Steel |
| |
| LIU Zhan-zeng,ZENG Han-sheng,DING Cui-jiao,ZHANG Dao-ming,JIANG Yue-dong,CHEN Peng-fei. Technology for Reduction of Thickness of Decarburization Layer in Cord Steel[J]. Wisco Technology, 2005, 43(6): 12-15 |
| |
| Authors: | LIU Zhan-zeng ZENG Han-sheng DING Cui-jiao ZHANG Dao-ming JIANG Yue-dong CHEN Peng-fei |
| |
| Affiliation: | 1.The Technology Center of WlSCO,Wuhan 4301380,China;2.The Heavy Section Mill of WISCO,Wuhan 43(1383,China |
| |
| Abstract: | In order to solve the problem that the thickness of the decarburization layer of the cord steel goes beyond the specification all the factors affecting the thickness of the decarburization layer in the process of reheating in the reheating furnace have been analyzed by testing the thermal characteristics of the reheating furnace.In the end,the thickness of the decarburization layer of the cord wire has been controlled within the limit of 1.2?%D by optimizing the ratio of air and fuel as well as other counter measures. |
| |
| Keywords: | decarburization cord wire reheating furnace ratio of air and fuel |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
