首页 | 本学科首页   官方微博 | 高级检索  
     

高锰酸钾法去除染料的影响因素及其工艺条件
引用本文:张秀芳,安庆大,薛文平,郝军.高锰酸钾法去除染料的影响因素及其工艺条件[J].大连轻工业学院学报,2004,23(1):8-10.
作者姓名:张秀芳  安庆大  薛文平  郝军
作者单位:大连轻工业学院化学工程系,大连轻工业学院化学工程系,大连轻工业学院化学工程系,大连轻工业学院化学工程系 辽宁大连 116034,辽宁大连 116034,辽宁大连 116034,辽宁大连 116034
摘    要:利用高锰酸钾对4种染料进行了处理。以染料的去除率为监测指标,考察了影响染料去除率的因素——反应时间、pH以及高锰酸钾加入量的影响。找出了处理这4种染料的最佳工艺条件。反应的最佳条件分别为:直接桃红12B,反应时间为5min,pH为5.7,高锰酸钾加入量为0.5mL;直接耐酸大红4BS,反应时间为5min,pH为1.0,高锰酸钾加入量为1.2mL;直接耐晒翠蓝GL.反应时间为5min,pH为1,5,高锰酸钾加入量为1.0mL;活性翠蓝K—GL,反应时间为7min,DH为0.5,高锰酸钾加入量为2.0mL。在最佳工艺条件下,4种染料的去除率均在90%以上。

关 键 词:高锰酸钾法  染料  工艺条件  去除率  印染废水  废水处理
文章编号:1005-4014(2004)01-0008-03

Influencing factors and technology condition for dyestuff removal by using potassium permanganate
ZHANG Xiu-fang,An Qing-da,XUE Wen-ping,HAO Jun.Influencing factors and technology condition for dyestuff removal by using potassium permanganate[J].Journal of Dalian Institute of Light Industry,2004,23(1):8-10.
Authors:ZHANG Xiu-fang  An Qing-da  XUE Wen-ping  HAO Jun
Abstract:This paper reports the study on factors influencing removal rate by using potassium permanganate to remove dyestuff, including reaction time, pH, and quantity of potassium permanganate used. Optimum technology conditions, with removal rate more than 90%, for four kinds of dyestuffs(direct pink 12B, direct acid-resisting scarlet 4BS, sun green blue GL and active cui blue K-GL)are determined, respectively.
Keywords:dyestuff  potassium permanganate  degratation
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号