| 拉深模激光毛化工艺参数实验研究 |
| |
| 引用本文： | 骆志高,郭啸栋,范彬彬.拉深模激光毛化工艺参数实验研究[J].模具工业,2009,35(3):60-62. |
| |
| 作者姓名： | 骆志高 郭啸栋 范彬彬 |
| |
| 作者单位： | 江苏大学机械工程学院,江苏镇江,212013 |
| |
| 摘 要： | 为改善拉深模摩擦和润滑条件,提高其使用寿命,提出使用激光毛化技术对其表面进行造型强化。通过实验对影响激光毛化效果的主要工艺参数进行研究,得到拉深模激光毛化的合适工艺参数范围,为拉深模激光毛化表面摩擦性能研究及毛化点尺寸优化奠定基础。
|
| 关 键 词： | 拉深模 失效 激光毛化 工艺参数 |
Experimental study of technological parameters of laser texturing for drawing dies |
| |
| LUO Zhi-gao,GUO Xiao-dong,FAN Bin-bin.Experimental study of technological parameters of laser texturing for drawing dies[J].Die & Mould Industry,2009,35(3):60-62. |
| |
| Authors: | LUO Zhi-gao GUO Xiao-dong FAN Bin-bin |
| |
| Affiliation: | School of Mechanical Engineering;Jiangsu University;Zhenjiang;Jiangsu 212013;China |
| |
| Abstract: | After an analysis on the work process and failure of drawing dies,laser texturing technique(LT) was proposed for strengthening the die surface in order to improve the frictional and lubricating conditions of drawing dies and enhance their service life.The main technological parameters that influence LT effect were investigated through experiments and a proper range of LT parameters for processing drawing dies was obtained.This work lays foundation for the further research of tribological properties of textu... |
| |
| Keywords: | drawing die failure laser texturing technological parameter |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
