| 制备工艺对金属结合剂胎体抗弯强度的影响 |
| |
| 引用本文： | 肖长江,朱玲艳,张恒涛,栗正新.制备工艺对金属结合剂胎体抗弯强度的影响[J].佛山陶瓷,2014(4):9-11. |
| |
| 作者姓名： | 肖长江 朱玲艳 张恒涛 栗正新 |
| |
| 作者单位： | 河南工业大学材料科学与工程学院,郑州450001 |
| |
| 摘 要： | 本文以铁基和铜基结合剂为原材料,研究其在不同的球磨时间和烧结温度下抗弯强度的变化。实验结果表明:球磨时间和烧结温度对铁基和铜基结合剂胎体的抗弯强度有很大的影响。对于铁基和铜基结合剂,当球磨时间为30 h时、烧结温度分别为760℃和720℃时,样品的最大抗弯强度值分别为457 MPa和644 MPa。
|
| 关 键 词： | 铁基结合剂 铜基结合剂 球磨时间 烧结温度 抗弯强度 |
Influence of Preparation Process on Flexural Strength of the Metal Bond Matrix |
| |
| XIAO Chang-jiang,ZHU Ling-yan,ZHANG Heng-tao,LI Zheng-xin.Influence of Preparation Process on Flexural Strength of the Metal Bond Matrix[J].Foshan Ceramics,2014(4):9-11. |
| |
| Authors: | XIAO Chang-jiang ZHU Ling-yan ZHANG Heng-tao LI Zheng-xin |
| |
| Affiliation: | (Henan University of Technology School of Material Science and Engineering,Zhengzhou 450001 ) |
| |
| Abstract: | In this paper, Fe-matrix and Cu-matrix bonding for raw materials, Influences of different milling time and sintering temperature on the flexural strength were studied. Experimental results show that： the milling time and sintering temperature have a great influence on the iron-and copper-based matrix binder flexural strength. For Fe-matrix and Cu-matrix bonding, when the milling time is 30h, the sintering temperature was 760 ℃ and 720 ℃, The maximum bending strength of the samples were 457 MPa and 644 MPa. |
| |
| Keywords: | Fe-matrix bonding Cu-matrix bonding milling time sintering temperature bending strength |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
