| 薄壁塑件注塑成形特性的试验研究 |
| |
| 引用本文： | 宋满仓,颜克辉,赵丹阳.薄壁塑件注塑成形特性的试验研究[J].中国机械工程,2006(Z2). |
| |
| 作者姓名： | 宋满仓 颜克辉 赵丹阳 |
| |
| 作者单位： | 大连理工大学精密与特种加工教育部重点实验室，大连理工大学精密与特种加工教育部重点实验室，大连理工大学精密与特种加工教育部重点实验室 大连，116024，大连，116024，大连，116024 |
| |
| 摘 要： | 设计制造了一可成形薄壁塑件的模具,利用正交试验方法(田口方法)进行充模试验,研究各工艺参数(注射速度、注射压力、熔体温度、注射量和模具温度等)对薄壁塑件注塑成形充模过程的影响。研究结果表明:模具温度对薄壁塑件的填充起决定性作用,注射压力和注射量是影响薄壁塑件成形的重要工艺参数,注射速度与熔体温度之间的交互作用对薄壁塑件成形的影响显著。
|
| 关 键 词： | 注射工艺参数 薄壁塑件 正交试验方法(田口方法) 注塑模具 |
Experimental Research on Injection Molding Characteristics for Thin Wall Plastic Parts |
| |
| Song Mancang Yan Kehui Zhao Danyang Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education,Dalian University of Technology,Dalian,Liaoning.Experimental Research on Injection Molding Characteristics for Thin Wall Plastic Parts[J].China Mechanical Engineering,2006(Z2). |
| |
| Authors: | Song Mancang Yan Kehui Zhao Danyang Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education Dalian University of Technology Dalian Liaoning |
| |
| Affiliation: | Song Mancang Yan Kehui Zhao Danyang Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education,Dalian University of Technology,Dalian,Liaoning,116024 |
| |
| Abstract: | A mold that thin wall plastic parts can be molded was designed and manufactured.U- sing the orthogonal experimental method(Taguchi method),the influence of different processing pa- rameters(i.e.injection rate,injection pressure,melt temperature,metering size and mold tempera- ture)on the molding process for thin wall plastic parts were discussed.The results show that mold temperature is the decisive parameter to the molding,injection pressure and metering size are the prin- cipal factors in molding process,the interaction of injection rate and melt temperature is significant to the molding. |
| |
| Keywords: | injection processing parameter thin wall plastic part orthogonal experimental method(Taguchi method) injection mold |
| 本文献已被 CNKI 等数据库收录！ |
