| 金属液在连续纤维预制型中的横向补缩 |
| |
| 引用本文： | 于家康,闫庆,周尧和.金属液在连续纤维预制型中的横向补缩[J].特种铸造及有色合金,2005,25(2):80-82. |
| |
| 作者姓名： | 于家康 闫庆 周尧和 |
| |
| 作者单位： | 西北工业大学 |
| |
| 基金项目： | 国家自然科学基金资助项目 (699760 2 2 ) |
| |
| 摘 要： | 研究了金属液在连续纤维预制型中的横向补缩。提出了金属液在连续纤维预制型中的横向补缩模型，依据契尔文诺夫定律推导出横向补缩时纤维束间距与纤维几何形态、金属基体凝固收缩率和纤维体积分数之间的关系式。研究了温度梯度和凝固压力对碳纤维／铝复合材料横向补缩的影响。结果表明：纤维束间距、束内纤维间距、温度梯度和凝固压力对连续纤维增强复合材料的横向补缩均有重要影响。
|
| 关 键 词： | 复合材料 凝固 补缩 碳纤维 |
| 文章编号： | 1001-2249(2005)02-0080-03 |
| 修稿时间： | 2004年9月10日 |
Transverse Feeding of Molten Metal in Continuouse Fiber Preform |
| |
| Yu Jiakang,Yan Qing,ZHOU Yaohe.Transverse Feeding of Molten Metal in Continuouse Fiber Preform[J].Special Casting & Nonferrous Alloys,2005,25(2):80-82. |
| |
| Authors: | Yu Jiakang Yan Qing ZHOU Yaohe |
| |
| Abstract: | Transverse feeding of molten metal in continuous fiber preform was investigated theoretically and experimentally.A transverse feeding model was proposed,and a formula of fiber bundle spacing related to fiber geometry,solidification shrinkage rate of metal matrix and volume fraction of fiber were derived from Chevnov law during transverse feeding.The effects of temperature gradients and solidiification pressure on the transverse feeding of C fiber/Al composites were investigated.The results showed that fiber bundle gap,fiber gap in bundles,temperature gradients and solidification pressure siginificantly affect the transverse feeding of continuous fiber reinforced composites. |
| |
| Keywords: | Composites Solidification Feeding Aluminum Carbon Fiber |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
