| 二次正火温度对B+级钢低温韧性的影响 |
| |
| 引用本文： | 刘德义,孙立赢,陈汝淑,刘世程. 二次正火温度对B+级钢低温韧性的影响[J]. 热加工工艺, 2011, 40(4) |
| |
| 作者姓名： | 刘德义 孙立赢 陈汝淑 刘世程 |
| |
| 作者单位： | 大连交通大学材料科学与工程学院,辽宁大连,116028 |
| |
| 摘 要： | 用金相显微镜、扫描电镜、低温冲击及拉伸试验等方法,研究了二次正火温度对B+级钢显微组织和低温冲击性能的影响。结果表明:较之一次正火,二次正火后组织明显细化,强度有所提高,塑性变化不大,低温冲击功明显提高,增加幅度为30%以上;二次正火温度不宜过高,否则将导致低温冲击功降低;亚温二次正火对提高低温冲击功作用不大;在870℃二次正火,可获得优良的强韧性配合。
|
| 关 键 词： | 二次正火 B 级钢 显微组织 低温冲击功 |
Effect of Second Normalizing Temperatures on Low-temperature Toughness of B+Grade Cast Steel |
| |
| LIU Deyi,SUN Liying,CHEN Rushu,LIU Shicheng. Effect of Second Normalizing Temperatures on Low-temperature Toughness of B+Grade Cast Steel[J]. Hot Working Technology, 2011, 40(4) |
| |
| Authors: | LIU Deyi SUN Liying CHEN Rushu LIU Shicheng |
| |
| Affiliation: | LIU Deyi,SUN Liying,CHEN Rushu,LIU Shicheng(School of Materials Science and Engineering,Dalian Jiaotong University,Dalian 116028,China) |
| |
| Abstract: | The influences of the second normalizing temperatures on the microstructure and low temperature impact properties of B+grade steel were studied by microscope,SEM,low temperature impact and tensile tests.The results indicate that,after the second normalizing,compared with the first normalizing,the microstructure is obviously refined,the strength increases to some extent,the ductility changes little,the low-temperature impact energy improves obviously,above 30%.The second normalizing temperature should not be... |
| |
| Keywords: | the second normalizing B grade steel microstructure low-temperature impact energy |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
