| 热交换器管程进出口室盖板应力分析及强度校核 |
| |
| 引用本文： | 余海军,杨华龙,申丽萍,等. 热交换器管程进出口室盖板应力分析及强度校核[J]. 石油化工设备, 2014, 0(2): 26-30 |
| |
| 作者姓名： | 余海军 杨华龙 申丽萍 等 |
| |
| 作者单位： | [1]武汉金中石化工程有限公司,湖北 武汉430223 [2]国家粮食局 武汉科学研究设计院,湖北 武汉430079 |
| |
| 摘 要： | 利用ANSYS有限元分析软件分析了某特殊型号热交换器的管程进出口室盖板在温度载荷和压力载荷同时作用下结构的温度分布及应力分布。按照ASME规范进行了强度校核,为管程进出口室盖板强度设计和安全评估提供了可靠依据。
|
| 关 键 词： | 热交换器 进出口室盖板 应力分析 强度评定 |
Stress Analysis and Strength Check of Heat Exchanger Onlet-oulet Cover |
| |
| YU Hai-jun,YANG Hua-long,. Wuhan Jinzhong Petrochemical Engineering Administration of Grain Science Research and D SHEN Li-ping,ZHANG Jin-xin. Stress Analysis and Strength Check of Heat Exchanger Onlet-oulet Cover[J]. Petro-Chemical Equipment, 2014, 0(2): 26-30 |
| |
| Authors: | YU Hai-jun YANG Hua-long . Wuhan Jinzhong Petrochemical Engineering Administration of Grain Science Research D SHEN Li-ping ZHANG Jin-xin |
| |
| Affiliation: | Co. Ltd. , Wuhan 430223, China; 2. The State esign Institute of Wuhan,Wuhan 430079, China) |
| |
| Abstract: | The ANSYS was applied to analyze the stress and temperature field of heat exchanger onlet-oulet cover under the combined action of temperature and pressure load,and according to ASME codes,the strength verification of key parts was implemented to provide reliable basis for engineering design and safety assessment of onlet-oulet cover. |
| |
| Keywords: | heat exchanger onlet-oulet cover stress analysis strength verification |
| 本文献已被 CNKI 维普 等数据库收录！ |
