| 全自动平压平模切机肘杆机构运动精度可靠性分析 |
| |
| 引用本文： | 成刚虎,王西珍.全自动平压平模切机肘杆机构运动精度可靠性分析[J].中国机械工程,2007,18(15):1786-1789. |
| |
| 作者姓名： | 成刚虎 王西珍 |
| |
| 作者单位： | 西安理工大学,西安,710048 |
| |
| 摘 要： | 将各原始误差视为随机变量，对全自动平压平模切机肘杆机构分别在仅有杆长尺寸误差或铰链间隙误差以及两种误差同时存在的3种情况下，对其输出运动误差进行了分析与综合，建立了机构运动精度可靠性分析模型。对杆长尺寸误差和铰链间隙误差随机变量均值和方差的改变给机构输出运动精度可靠度的影响进行了MATLAB仿真分析。
|
| 关 键 词： | 肘杆机构 运动精度 可靠性分析 仿真 |
| 文章编号： | 1004-132X（2007）15-1786-04 |
| 修稿时间： | 2006-06-08 |
Reliability Analysis for Kinematics Accuracy on Elbow-bar Mechanism of Automatic Die Cutting Machine |
| |
| Chen Ganghu,Wang Xizhen.Reliability Analysis for Kinematics Accuracy on Elbow-bar Mechanism of Automatic Die Cutting Machine[J].China Mechanical Engineering,2007,18(15):1786-1789. |
| |
| Authors: | Chen Ganghu Wang Xizhen |
| |
| Abstract: | By taking the original errors as stochastic variables, the reliability of the elbow-bar mechanism of automatic die cutting machine was analyzed and calculated in three instances, namely only in the presence of the error of bar length, only in the presence of joint-gaps of hinge or in the presence of the both of them. On the basis of the reliability analysis, the influences of the change of the stochastic variable mean values and mean squares of bar length and hinge joint-gaps errors on the mechanism output accuracy were discussed by making use of MATLAB. |
| |
| Keywords: | elbow-bar mechanism kinematics accuracy reliability analysis simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
