| 武钢自制冷轧工作辊的质量分析与工艺改进 |
| |
| 引用本文： | 陈光明,沈伟芳,汪磊川.武钢自制冷轧工作辊的质量分析与工艺改进[J].上海金属,2003,25(5):34-37. |
| |
| 作者姓名： | 陈光明 沈伟芳 汪磊川 |
| |
| 作者单位： | 武汉钢铁股份有限公司冷轧厂,武汉,430083 |
| |
| 摘 要： | 对武钢自制冷轧工作辊在使用中出现的质量问题进行了分析，认为辊坯存在原始质量缺陷并提出改进的工艺措施。使用证明：改进后的冷轧工作辊质量良好，轧机使用完全正常，辊耗降低，经济效益显著。
|
| 关 键 词： | 冷轧工作辊 失效分析 工艺改进 质量分析 轧机 轧辊 |
| 修稿时间： | 2002年7月5日 |
THE QUALITY ANALYSIS AND TECHNICAL IMPROVEMENT ON THE SELF-MADE COLD WORKING ROLL IN WISCO |
| |
| Chen Guangming,Shen Weifang,Wang Leichuan.THE QUALITY ANALYSIS AND TECHNICAL IMPROVEMENT ON THE SELF-MADE COLD WORKING ROLL IN WISCO[J].Shanghai Metals,2003,25(5):34-37. |
| |
| Authors: | Chen Guangming Shen Weifang Wang Leichuan |
| |
| Abstract: | The quality problem of the self-made cold working roll that appeared in the rolling process was analyzed,and a technical measurement was proposed to improve the original quality fault in the roll stock.The results showed that the improved cold working roll was good in quality and normal in use,the roll consumption reduced and the economic benefits was excellent. |
| |
| Keywords: | Cold Working Roll Failure Analysis Technical Improvement |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
