| 双凸模差速挤压方形弯曲管件工艺过程有限元模拟 |
| |
| 引用本文： | 宋继顺,杜德恒,马叙,尹康,崔宏祥. 双凸模差速挤压方形弯曲管件工艺过程有限元模拟[J]. 重型机械, 2010, 0(2): 6-11,16 |
| |
| 作者姓名： | 宋继顺 杜德恒 马叙 尹康 崔宏祥 |
| |
| 作者单位： | 天津理工大学材料科学与工程学院,天津,300384 |
| |
| 基金项目： | 国家自然科学基金，全国大学生创新性实验计划项目 |
| |
| 摘 要： | 提出通过控制不同凸模的压下速度并调节挤压管件的弯曲曲率,实现弯曲管件一次性挤压成形的新方法。采用有限元法模拟了弯曲管件双凸模差速挤出过程,分析了双凸模挤压过程速度场分布、材料流动规律、挤压力、应力场和应变场的分布。
|
| 关 键 词： | 有限元模拟 挤出弯曲 一次性成形 流动控制 |
Finite element analysis of differential-velocity extrusion process of dual punch for bending tube |
| |
| SONG Ji-shun,DU De-heng,MA Xu,YIN Kang,CUI Hong-xiang. Finite element analysis of differential-velocity extrusion process of dual punch for bending tube[J]. Heavy Machinery, 2010, 0(2): 6-11,16 |
| |
| Authors: | SONG Ji-shun DU De-heng MA Xu YIN Kang CUI Hong-xiang |
| |
| Affiliation: | SONG Ji-shun,DU De-heng,MA Xu,YIN Kang,CUI Hong-xiang(School of Materials Science , Engineering Tianjin University of Technology,Tianjin 300384,China) |
| |
| Abstract: | This paper proposes a new method to achieve one step extrusion forming of the bending tube by controlling the pressing velocity of different punches and adjusting the curvature of the extruded tube.Finite element method has been used to simulate the differential-velocity extrusion process of the dual punch for the bending tube,and the velocity field distribution,law of material flow,and distribution of the squeezing pressure,stress field and strain field in the extrusion process have been analyzed. |
| |
| Keywords: | finite element simulation extrusion bending one step forming flow control |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
