| 热连轧生产线轧制节奏的提速优化 |
| |
| 引用本文： | 刘树,谭欧,徐朝辉. 热连轧生产线轧制节奏的提速优化[J]. 轧钢, 2018, 35(1): 76-78 |
| |
| 作者姓名： | 刘树 谭欧 徐朝辉 |
| |
| 作者单位： | 重庆钢铁股份有限公司，重庆401258 |
| |
| 摘 要： | 介绍了某热连轧厂通过优化加热炉的步进梁与装、出钢机的逻辑关系,以及优化运输区的1#回转台与1#步进梁、快链的逻辑关系,打通了整条生产线的前后咽喉,使生产节奏得到大幅提高,小时产量从19.0提高到21.8块。
|
| 关 键 词： | 关键词：加热炉、装钢机、出钢机、回转台、步进梁、快链 |
| 收稿时间： | 2017-01-23 |
Improvement of rolling pace of hot strip rolling line |
| |
| LIU Shu,TAN Ou,XU Zhao- hui. Improvement of rolling pace of hot strip rolling line[J]. Steel Rolling, 2018, 35(1): 76-78 |
| |
| Authors: | LIU Shu TAN Ou XU Zhao- hui |
| |
| Affiliation: | Chongqing Iron & Steel Co.,Ltd.,Chongqing 401258,China |
| |
| Abstract: | To speed the rolling pace of a hot strip rolling line,the logical relationships were optimized between furnace walking beam and charging/tapping machine,and among No.1 rotary table,No.1 walking beam and fast transport chain in coil transportation zone.The bottleneck was broken of whole rolling line,and the output per hour got improved from 19.0 pieces to 21.8 pieces. |
| |
| Keywords: | Key words: furnace charging machine tapping machine rotary table walking beam fast transport chain |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《轧钢》浏览原始摘要信息 |
|
点击此处可从《轧钢》下载全文 |
|
