| 提高热轧中间坯头尾剪切精度的控制技术 |
| |
| 引用本文： | 王建功,李继新,童燕成,陈瑞岩,陈彤,李瑞. 提高热轧中间坯头尾剪切精度的控制技术[J]. 轧钢, 2018, 35(2): 68-70 |
| |
| 作者姓名： | 王建功 李继新 童燕成 陈瑞岩 陈彤 李瑞 |
| |
| 作者单位： | 首钢京唐钢铁联合有限责任公司热轧部，河北唐山063200 |
| |
| 摘 要： | 结合某热轧厂半连轧生产线上的飞剪控制原理,分析了飞剪在剪切过程中存在的问题以及对切损造成的影响。同时从激光测速仪的应用、热金属探测器(HMD)的检测精度改善以及现场工况条件的干扰预防等方面做了技术分析和措施落实,使中间坯头部剪切精度平均提高了48%,尾部剪切精度平均提高了72%,进而降低了产线金属损失,提高了热轧厂经济效益。
|
| 关 键 词： | 中间坯 剪切 精度 |
| 收稿时间： | 2017-01-09 |
Improvement of the head and tail shearing precision of intermediate slab |
| |
| WANG Jian- gong,LI Ji- xin,TONG Yan- cheng,CHEN Rui- yan,CHEN Tong,LI Rui. Improvement of the head and tail shearing precision of intermediate slab[J]. Steel Rolling, 2018, 35(2): 68-70 |
| |
| Authors: | WANG Jian- gong LI Ji- xin TONG Yan- cheng CHEN Rui- yan CHEN Tong LI Rui |
| |
| Affiliation: | Hot Rolling Dept.,Shougang Jingtang United Iron & Steel Co.,Ltd.,Tangshan 063200,China |
| |
| Abstract: | Based on the shearing principle of a flying shear in a hot strip rolling line,the existing problems and its effect on cutting loss were analyzed.By application of laser velocimetry,detection accuracy improvement of HMD and interference prevention of the working conditions,the head cutting precision increased average 48% and tail precision increased average 72%.And then，the metal loss was reduced and the economic benefit was improved of the hot rolling mill. |
| |
| Keywords: | intermediate slab shearing precision |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《轧钢》浏览原始摘要信息 |
|
点击此处可从《轧钢》下载全文 |
|
