Facile fabrication of superhydrophobic polyimide/polytetrafluoroethylene composite coatings with high water adhesion

A facile casting method was used to fabricate superhydrophobic polyimide/polytetrafluoroethylene composite coatings with high water adhesion. The water contact angles of the composite coatings were larger than 150 °, expressing superhydrophobic property. But water droplets pinned tightly on the composite coating, even if it was upside down. The X‐ray photoelectron spectrum analysis indicated that polyimide and polytetrafluoroethylene coexisted in the resulting coating. The observation with scanning electron microscopy showed that the composite coating formed lotus‐like structure with many spherical polyimide papillae randomly bonding on the surface. But the tops of the polyimide papillae were not covered by lance‐shaped Teflon fibres, forming an inhomogenous and discontinuous surface structure. This special surface chemical distribution and lotus‐like structure combined to contribute to the high adhesive superhydrophobicity. This simple method may greatly extend the application range of high adhesive superhydrophobic surfaces in microcontrollable and microfluidic application. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42810.