Fluorinated bismaleimide resin with good processability,high toughness,and outstanding dielectric properties

In this study, novel fluorinated bismaleimide (BMI) resins were prepared by the copolymerization of 2,2′‐bis[4‐(4‐maleimidephenoxy)phenyl]hexafluoropropane (6FBMP) and diallyl hexafluorobisphenol A (6FDABPA) to enhance their dielectric properties. The dielectric properties of the resins were investigated in the frequency range 7–18 GHz through a cavity method. Through the incorporation of a hexafluoroisopropyl group with the polymer chain, the dielectric constant (ε) was effectively decreased because of the small dipole and the low polarizability of the carbon‐fluorine (C? F) bonds. The 6FBMP/6FDABPA resin possessed excellent dielectric properties, with ε being 2.88 and the dielectric loss being 0.009 at 10 GHz and 25°C. In comparison with the 4,4′‐bismaleimidodiphenylmethane (BDM)/2,2′‐diallyl bisphenol A (DABPA) resin, the glass‐transition temperature (T_g) of 6FBMP/6FDABPA decreased. The flexible ether group in the long chain of 6FBMP was considered to disrupt chain packing and cause a decreased crosslinking density and a lower T_g. 6FBMP/6FDABPA showed a similar thermal decomposition temperature and good thermal properties like the BDM/DABPA resin, whereas the impact strength of the 6FBMP/6FDABPA resin was almost 1.6 times higher than that of the BDM/DABPA resin. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42791.