| 带式输送机头部支架的有限元分析 |
| |
| 引用本文： | 郑学谦,秦东晨,梁颖.带式输送机头部支架的有限元分析[J].现代制造技术与装备,2007(3):70-71. |
| |
| 作者姓名： | 郑学谦 秦东晨 梁颖 |
| |
| 作者单位： | 1. 郑州大学机械工程学院,郑州,450001
2. 中原工学院机电学院,郑州,450007 |
| |
| 摘 要： | 用三维实体造型软件Pro-E创建带式输送机头部支架三维模型,将带式输送机头部支架三维模型导入ANSYS软件对其进行有限元分析,分析结果表明头部支架的强度和刚度满足设计要求。
|
| 关 键 词： | 带式输送机 头部支架 有限元分析 |
Finite Elements Analysis of Head Frame Used on Belt Conveyor |
| |
| ZHENG Xueqian,QIN Dongchen,LIANG Ying.Finite Elements Analysis of Head Frame Used on Belt Conveyor[J].Modern Manufacturing Technology and Equipment,2007(3):70-71. |
| |
| Authors: | ZHENG Xueqian QIN Dongchen LIANG Ying |
| |
| Affiliation: | 1. College of Mechanical Engineering, Zhengzhou University , Zhengzhou 450001 ; 2. College of Electromechanics, Zhongyuan University of Technology, Zhengzhou 450007 |
| |
| Abstract: | Pro-E is used to build the three-dimensional solid model and ANSYS is used to perform finite element analysis for the head frame of the belt conveyor. The analysis result shows that the design meets the requirement of rigidity and strength. |
| |
| Keywords: | Pro/E ANSYS |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
