| Abstract: | Recently, we have witnessed the gradual miniaturization of electronic devices. In miniaturized devices, flip‐chip bonding has become a necessity over other bonding methods. For the electrical connections in miniaturized devices, fine‐pitch solder bumping has been widely studied. In this study, high‐volume solder‐on‐pad (HV‐SoP) technology was developed using a novel maskless printing method. For the new SoP process, we used a special material called a solder bump maker (SBM). Using an SBM, which consists of resin and solder powder, uniform bumps can easily be made without a mask. To optimize the height of solder bumps, various conditions such as the mask design, oxygen concentration, and processing method are controlled. In this study, a double printing method, which is a modification of a general single printing method, is suggested. The average, maximum, and minimum obtained heights of solder bumps are 28.3 μm, 31.7 μm, and 26.3 μm, respectively. It is expected that the HV‐SoP process will reduce the costs for solder bumping and will be used for electrical interconnections in fine‐pitch flip‐chip bonding. |
