| 基于响应面法（RSM）的锻造预成形多目标优化设计 |
| |
| 引用本文： | 杨艳慧,刘 东,贺子延,罗子健.基于响应面法（RSM）的锻造预成形多目标优化设计[J].稀有金属材料与工程,2009,38(6):1019-1024. |
| |
| 作者姓名： | 杨艳慧 刘 东 贺子延 罗子健 |
| |
| 作者单位： | 西北工业大学,陕西,西安,710072 |
| |
| 摘 要： | 以航空发动机涡轮盘锻件为研究对象,应用响应面法(Response surfce Methodology,RSM)和有限元数值模拟(FEM)对锻造过程预成形设计的多目标优化问题进行了研究.首先以模具充填完整和提高锻件内变形均匀性为目标,建立了有限元数值模拟与响应面法相结合的二阶分析模型,并对优化结果进行了讨论.其次,在原优化设计的基础上以降低锻造过程的成形载荷为目标进行了预成形再设计.结果表明,应用响应面法可灵活有效的对难变形材料锻造预成形坯料形状进行多目标优化设计.
|
| 关 键 词： | 预成形设计 响应面法(RSM) 有限元数值模拟(FEM) 多目标优化 |
| 收稿时间： | 2008/9/15 0:00:00 |
| 修稿时间： | 2009/3/26 0:00:00 |
Multi-Objective Preform Optimization Using RSM |
| |
| Yang Yanhui,Liu Dong,He Ziyan and Luo Zijian.Multi-Objective Preform Optimization Using RSM[J].Rare Metal Materials and Engineering,2009,38(6):1019-1024. |
| |
| Authors: | Yang Yanhui Liu Dong He Ziyan and Luo Zijian |
| |
| Abstract: | The multi-objective optimization was studied using response surface method (RSM) and FEM simulation for a preform design of aeroengine disk forging. Firstly, taking the deformation homogeneity within forgings and die filling completeness as the objective, a reduced quadratic model was developed through regression analysis and ANOVA (analysis of variance), and then the optimal results are obtained and discussed. Secondly, redesign and optimization were carried out to reduce the deformation load on the basis ... |
| |
| Keywords: | preform design response surface method (RSM) FEM simulation multi-objective optimization |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《稀有金属材料与工程》浏览原始摘要信息 |
|
点击此处可从《稀有金属材料与工程》下载全文 |
|
