首页 | 本学科首页   官方微博 | 高级检索  
     

脱硫除雾器除雾特性的研究
引用本文:杨柳,王世和,王小明. 脱硫除雾器除雾特性的研究[J]. 动力工程, 2005, 25(2): 289-292
作者姓名:杨柳  王世和  王小明
作者单位:1. 东南大学,环境工程系,南京,210096
2. 国电南京环境保护研究所,南京,210096
基金项目:国家高技术研究发展计划(863计划)
摘    要:针对除雾器的菱形布置方式和叶片的不同几何形状,通过大量实验测定了除雾器的压力降和速度,利用水平衡法计算了除雾效率和液滴浓度,分析了除雾器气流速度、叶片间距对除雾效率的影响及除雾器级数对除雾效率和压力降的影响,为该型除雾器的设计和制造提供了参考依据。图13

关 键 词:环境工程学  湿式烟气脱硫  除雾特性  除雾器
文章编号:1000-6761(2005)02-0289-04

Study on Characteristics of A Sulfur Removal Demister
YANG Liu,WANG Shi-he,WANG Xiao-ming. Study on Characteristics of A Sulfur Removal Demister[J]. Power Engineering, 2005, 25(2): 289-292
Authors:YANG Liu  WANG Shi-he  WANG Xiao-ming
Abstract:Having in view the lozenge arrangement of demisters and diversely shaped plates, the pressure drop and flow velocity in demisters were measured during many tests, while the demisting efficiency and the concentration of liquid droplets were calculated by the liquid balance method; the effect of flow velocity and that of plate pitch on demisting efficiency as well as the influence of the number of demister stages on both the efficiency and pressure drop have been analyzed, herewith providing some referential material for design and production of such demisters. Figs 13.
Keywords:environmental engineering  wet flue gas desulfurization  demisting characteristic  demister  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号