| 阶梯式旋转EFP成形机理的数值研究 |
| |
| 引用本文： | 李惠明,陈智刚,侯秀成,任中才. 阶梯式旋转EFP成形机理的数值研究[J]. 弹箭与制导学报, 2010, 30(1) |
| |
| 作者姓名： | 李惠明 陈智刚 侯秀成 任中才 |
| |
| 作者单位： | 1. 中北大学机电工程学院,太原,030051
2. 总装备部军械局,北京,100081 |
| |
| 摘 要： | 应用阶梯式药型罩对称凹凸结构的方法研究出一种旋转稳定而且带倾斜尾翼的EFP,利用TG建立三维有限元模型,采用非线性动力分析软件,分别对大锥角和球缺两种形式的阶梯药型罩成形情况进行模拟,最后通过对形成弹丸的外形及速度进行了分析,得出阶梯式药型罩有利于成型弹丸的飞行稳定,而且球缺罩成型情况要优于锥角罩。
|
| 关 键 词： | 阶梯 EFP 旋转稳定 数值模拟 |
Numerical Simulation of Formation Mechanism of Ladder-shaped Rotational EFP |
| |
| LI Huiming,CHEN Zhigang,HOU Xiucheng,REN Zhongcai. Numerical Simulation of Formation Mechanism of Ladder-shaped Rotational EFP[J]. Journal of Projectiles Rockets Missiles and Guidance, 2010, 30(1) |
| |
| Authors: | LI Huiming CHEN Zhigang HOU Xiucheng REN Zhongcai |
| |
| Affiliation: | 1 School of Mechatronics Engineering;North University of China;Taiyuan 030051;China;2 Ordnance Bureau;General Armaments Department;Beijing 100081;China |
| |
| Abstract: | Using the ladder shaped charge linear symmetric concave and convex structure method;this method developed a spin-stabilized EFP with inclined tail wing.The forming of big cone angle and spherical segment ladder shaped charge liner was simulated by nonlinear dynamic analysis software.The three-dimensional finite element mode was built by TG.At last,it analyzed the projectile forming shape and velocity and drew two conclusion :(1)ladder shaped charge liner is favorable to the projectile flying stability.(2)sp... |
| |
| Keywords: | ladder-shaped EFP spin-stabilized simulation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
