Prediction of Crosstalk in Ribbon Cables: Comparison of Model Predictions and Experimental Results |
| |
Authors: | Paul C.R. |
| |
Affiliation: | Department of Electrical Engineering, University of Kentucky, Lexington, KY 40506. (606) 258-8616; |
| |
Abstract: | The prediction of crosstalk in ribbon cables is investigated. Experimental results are obtained for a 20-wire ribbon cable and compared to the predictions of the multiconductor transmission line (MTL) model. Based on the experimental configuration tested, it would appear that accurate predictions of crosstalk can be achieved in these controlled-characteristic cables. The prediction accuracies are typically within ±1 dB for frequencies such that the line is electrically short and ±6 dB for frequencies such that the line is electrically long. It was found that the parasitic wires in the cable can have a significant effect (as much as 40 dB) on the coupling between a generator circuit and a receptor circuit in the cable. Therefore, to achieve accurate predictions in ribbon cables, one must consider the interactions between all wires in the cable. The wire insulation evidently cannot be ignored for frequencies such that the line is electrically long. The impedance of the reference wire cannot be ignored for low frequencies where the common-impedance coupling dominates the electromagnetic-field coupling. |
| |
Keywords: | |
|
|