|
|||||
|
|
| Fe-Co-B-Si-Nb-Cr块体非晶合金在纳米压痕过程中的变形行为 | |
| 引用本文： | 张志纯,龙志林,危洪清,彭建,许福,李乡安.Fe-Co-B-Si-Nb-Cr块体非晶合金在纳米压痕过程中的变形行为[J].中国有色金属学报,2009,19(7). |
| 作者姓名： | 张志纯 龙志林 危洪清 彭建 许福 李乡安 |
| 作者单位： | 1. 湘潭大学,材料与光电物理学院,湘潭,411105;湘潭大学,能源工程学院,湘潭,411100 2. 湘潭大学,材料与光电物理学院,湘潭,411105;湘潭大学,材料设计与制备技术湖南省重点实验室,湘潭,411105;湘潭大学,土木工程与力学学院,湘潭,411105 3. 湘潭大学,土木工程与力学学院,湘潭,411105 |
| 基金项目： | 湖南省自然科学基金，湖南省科技厅计划，湖南省教育厅资助项目 |
| 摘 要： | 利用纳米压痕技术研究直径为3 mm的{(Fe0.6Co0.4)0.75B0.2Si0.05]0.96Nb0.04}96Cr4块体非晶合金的变形行为以及加载速率对其塑性变形行为的影响规律.结果表明:该块体非晶合金在低加载速率下表现出显著的锯齿流变,而在高的加载速率下表现为连续的塑性变形;在纳米压痕过程中,该块体非晶合金出现室温蠕变现象,且其硬度值随着加载速率的增大而减小. |
| 关 键 词： | 块体非晶合金 纳米压痕 锯齿流变 蠕变 |
Deformation behaviour of Fe-Co-B-Si-Nb-Cr bulk amorphous alloy during nanoindentation |
|
| ZHANG Zhi-chun,LONG Zhi-lin,WEI Hong-qing,PENG Jian,XU Fu,LI Xian-gan.Deformation behaviour of Fe-Co-B-Si-Nb-Cr bulk amorphous alloy during nanoindentation[J].The Chinese Journal of Nonferrous Metals,2009,19(7). | |
| Authors: | ZHANG Zhi-chun LONG Zhi-lin WEI Hong-qing PENG Jian XU Fu LI Xian-gan |
| Abstract: | The deformation behaviour of {(Fe0.6Co0.4)0.75B0.2Si0.05]0.96Nb0.04}96Cr4 bulk amorphous alloy with a diameter of 3 mm and the influence of loading rate on its plastic deformation were investigated by the technique of nanoindentation. The results show that the {(Fe0.6Co0.4)0.75B0.2Si0.05]0.96Nb0.04}96Cr4 bulk amorphous alloy exhibits prominent serrated flow at low loading rate while the plastic deformation is continuous at high loading rate. During nanoindentation, the room temperature creep of the {(Fe0.6Co0.4)0.75B0.2Si0.05]0.96Nb0.04}96Cr4 bulk amorphous alloy is observed, and its hardness decreases with the increase of loading rate. |
| Keywords: | bulk amorphous alloy nanoindentation serrated flow creep |
| 本文献已被 万方数据 等数据库收录！ | |