首页 | 本学科首页   官方微博 | 高级检索  
     

水解/接触氧化/气浮工艺处理印染废水
引用本文:李亚峰,谢新立,秦亚敏.水解/接触氧化/气浮工艺处理印染废水[J].中国给水排水,2011,27(12).
作者姓名:李亚峰  谢新立  秦亚敏
作者单位:沈阳建筑大学市政与环境工程学院,辽宁沈阳,110168
摘    要:以青岛市某印染废水处理工程为例,介绍了水解/接触氧化/气浮工艺处理印染废水的工艺设计参数、处理效果、工程投资和运行成本.该工程处理水量为300m3/d,进水COD、BOD5和色度分别为644mg/L、151 mg/L和688倍.运行结果表明,对COD、BOD5和色度的去除率分别为88%、92%和95%,相应的出水水质分别为78 mg/L、12 mg/L和31倍,达到<纺织染整工业水污染物排放标准>(GB 4287-1992)的一级排放标准,处理费用为1.01元/m3.该工艺具有运行费用低、处理效果好、操作管理方便等优点.

关 键 词:印染废水  水解  接触氧化  气浮

Treatment of Printing and Dyeing Wastewater by Hydrolysis/Contact Oxidation/Air Floatation
LI Ya-feng,XIE Xin-li,QIN Ya-min.Treatment of Printing and Dyeing Wastewater by Hydrolysis/Contact Oxidation/Air Floatation[J].China Water & Wastewater,2011,27(12).
Authors:LI Ya-feng  XIE Xin-li  QIN Ya-min
Affiliation:LI Ya-feng,XIE Xin-li,QIN Ya-min(College of Municipal and Environmental Engineering,Shenyang Jianzhu University,Shenyang 110168,China)
Abstract:Taking a printing and dyeing wastewater treatment project of Qingdao as an example,the design parameters,treatment effect,project investment and operation cost of the hydrolysis/contact oxidation/air floatation process for treating printing and dyeing wastewater are introduced.The treatment capacity is 300 m3/d,and the influent COD,BOD5 and color are 644 mg/L,151 mg/L and 688 times respectively.The operation results show that the removal rates of COD,BOD5 and color are 88%,92%,95%,and the effluent COD,BOD5 ...
Keywords:printing and dyeing wastewater  hydrolysis  contact oxidation  air floatation  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号