| 飞机整体结构件加工变形的产生和对策 |
| |
| 引用本文： | 康小明,孙杰,苏财茂,柯映林.飞机整体结构件加工变形的产生和对策[J].中国机械工程,2004,15(13):1140-1143. |
| |
| 作者姓名： | 康小明 孙杰 苏财茂 柯映林 |
| |
| 作者单位： | 1. 上海交通大学航空航天工程系,上海,200030
2. 浙江大学现代制造工程研究所,杭州,310027 |
| |
| 基金项目： | 国家自然科学基金资助项目 ( 5 0 175 10 2 ) |
| |
| 摘 要： | 分析了整体结构件加工变形的产生机理。通过两个实例，说明了整体结构件已去除材料残余应力的释放和切削加工表面残余应力对工件变形的影响。提出了深冷处理消除毛坯残余应力、高速切削和切削加工工艺优化等抑制整体结构件加工变形的策略。针对整体结构件弯曲变形，提出了校正需要满足的基本曲率关系．
|
| 关 键 词： | 整体结构件 加工变形 机理 抑制 校形 |
| 文章编号： | 1004-132X(2004)13-1140-04 |
Sources and Control of Machining Distortions in Large Integral Structure |
| |
| Kang Xiaoming,Sun Jie,Su Caimao,Ke Yinglin.Sources and Control of Machining Distortions in Large Integral Structure[J].China Mechanical Engineering,2004,15(13):1140-1143. |
| |
| Authors: | Kang Xiaoming Sun Jie Su Caimao Ke Yinglin |
| |
| Affiliation: | Kang Xiaoming 1 Sun Jie 2 Su Caimao 2 Ke Yinglin 2 1.Shanghai Jiaotong University,Shanghai,200030 2.Zhejiang University,Hangzhou,310027 |
| |
| Abstract: | The mechanism of large integral structure machining distortions was analyzed. Two examples were given to show the sources of workpiece distortions: the release of residual stresses from the removed portion of the blank and the effect of machining-induced stresses. The solutions to this problem,including the relief of residual stresses in the blank, the application of high speed machining and the optimization of machining process, were presented. The relationship of several kinds of curvatures during the straightening process of a large integral structure was proposed. |
| |
| Keywords: | integral structure machining distortion mechanism control correct |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
