| 一种实用的混流泵叶轮设计方法 |
| |
| 引用本文： | 王红志. 一种实用的混流泵叶轮设计方法[J]. 机电工程技术, 2006, 35(3): 37-39 |
| |
| 作者姓名： | 王红志 |
| |
| 作者单位： | 深圳大学工程技术学院,广东,深圳,518060 |
| |
| 摘 要： | 在对优秀水力模型统计的基础上，利用一元流动理论的基本思想，按照离心泵叶轮的设计思路，对设计过程中的重要参数如叶轮出口宽度，叶轮外径、叶片出口角等的选取进行了修正，提出了一种实用的混流泵设计方法。
|
| 关 键 词： | 混流泵 叶轮 设计 |
| 文章编号： | 1009-9492（2006）03-0037-03 |
| 收稿时间： | 2005-11-29 |
| 修稿时间： | 2005-11-29 |
An Applied Method for the Mixed Flow Pump Impeller Design |
| |
| WANG Hong-zhi. An Applied Method for the Mixed Flow Pump Impeller Design[J]. Mechanical & Electrical Engineering Technology, 2006, 35(3): 37-39 |
| |
| Authors: | WANG Hong-zhi |
| |
| Affiliation: | WANG Hong-zhiSchool of Engineering and TechnologyShenzhen University Shenzhen518060 China |
| |
| Abstract: | An applied method for designing the impeller of a mixed flow pump is proposed. This method is based on the traditional designing procedure of centrifugal pumps which is generally used in this field. Several key parameters such as exit width and radius of the impeller and exit angle of blades are revised based on the analysis of some excellent hydraulic models of mixed flow pumps. |
| |
| Keywords: | mixed flow pump impeller design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
