| 振动注射成型中模腔内熔体冷却行为的研究 |
| |
| 引用本文： | 王喜顺,颜家华,彭玉成.振动注射成型中模腔内熔体冷却行为的研究[J].工程塑料应用,2001,29(5):13-15. |
| |
| 作者姓名： | 王喜顺 颜家华 彭玉成 |
| |
| 作者单位： | 华南理工大学工业装备与控制工程系, |
| |
| 摘 要： | 研究了振动注射成型过程中的模腔内聚合物熔体的冷却行为，讨论了振动频率、振动应变振幅、振动作用时间、熔体温度等对冷却时间的影响。结果表明，冷却时间随着振动频率、振动应变振幅、振动作用时间、熔体温度等的增加而延长。
|
| 关 键 词： | 冷却时间 振动注射成型 模腔 聚合物熔体 冷却行为 |
| 修稿时间： | 2000年12月20 |
STUDY ON THE COOLING BEHAVIOR OF POLYMER MELT IN CAVITY DURING OSCILLATION INJECTION MOLDING |
| |
| Wang Xishun,Yan Jiahua,Peng Yucheng.STUDY ON THE COOLING BEHAVIOR OF POLYMER MELT IN CAVITY DURING OSCILLATION INJECTION MOLDING[J].Engineering Plastics Application,2001,29(5):13-15. |
| |
| Authors: | Wang Xishun Yan Jiahua Peng Yucheng |
| |
| Abstract: | The cooling behavior of polymer melt in cavity during oscillation injection molding was studied. The influences of oscillatory frequency, oscillatory deformation amplitude, oscillatory time and melt temperature on the cooling time were discussed. The results showed that the cooling time increased with increase in oscillatory frequency, oscillatory deformadon amplitude, oscillatory time and melt temperature. |
| |
| Keywords: | cooling time oscillation injection molding |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
