首页 | 本学科首页   官方微博 | 高级检索  
     

激光点火过程的一维有限差分模型比较
引用本文:胡艳,沈瑞琪,叶迎华.激光点火过程的一维有限差分模型比较[J].火工品,2000(3):1-5.
作者姓名:胡艳  沈瑞琪  叶迎华
作者单位:南京理工大学化工学院,江苏,南京,210094
摘    要:建立 4种关于激光点火过程的一维有限差分模型 ,并通过计算对 4种模型的点火延迟时间和药剂表面温度变化曲线进行比较。结果表明 ,这两种因素对点火延迟时间和临界点火阈值的影响不可忽略 ,相比之下 ,化学反应热的影响更大 ,而且随着入射光能量水平的升高两因素对点火延迟时间的影响减小。考虑化学反应热 ,在入射光能量水平较低时 ,药剂表面温度的变化曲线出现双峰现象。入射光能量水平愈高点火延迟时间愈短

关 键 词:激光点火  一维有限差分模型  点火延迟时间  临界点火阈值
修稿时间:2000-06-21

Comparison of One-dimensional Finite Difference Model about the Process of Laser Ignition
HU Yan,SHEN Rui-qi,YE Ying-hua.Comparison of One-dimensional Finite Difference Model about the Process of Laser Ignition[J].Initiators & Pyrotechnics,2000(3):1-5.
Authors:HU Yan  SHEN Rui-qi  YE Ying-hua
Abstract:Four one dimensional finite difference models about the process of laser ignition are developed. Based on the calculations, function time and variation curve of surface temperature of four models is compared. Results show that effect of the two factors on function time and ignition threshold cannot be overlooked, the effect of chemical reaction heat is greater than that of the other factor, and the effect of them on function time reduces along with laser energy rising. If with effect of chemical reaction heat, variation curve of surface temperature of powder appears double peaks while laser energy is lower. The higher laser energy is, the shorter function time is.
Keywords:Laser ignition  One  dimensional finite difference model  Function time  Ignition threshold
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号