| 双湿式搅拌机底部框架焊缝结构微区残余应力数值模拟 |
| |
| 引用本文： | 尹飞鸿,干为民,戴建国.双湿式搅拌机底部框架焊缝结构微区残余应力数值模拟[J].机械设计与制造,2012(3):277-279. |
| |
| 作者姓名： | 尹飞鸿 干为民 戴建国 |
| |
| 作者单位： | 1. 常州工学院机电工程学院,常州,213002
2. 常州市特种加工重点实验室,常州,213002 |
| |
| 基金项目： | 国家863计划项目SQ2008AA10XK1468859);江苏省高校自然科学基金项目资助(08KJD460002) |
| |
| 摘 要： | 运用有限元软件ANSYS对双湿式搅拌机底部框架焊接过程进行了数值分析.采用高斯热源模型模拟手工钨极氩弧焊源,利用APDL编写循环程序实现热源的移动,得到双湿式搅拌机底部框架焊后的变形和残余应力场.从焊缝结构微区的Von Mises等效应力分布云图和节点的残余应力分布曲线可见:整个结构的焊后残余应力均为压应力,其值远小于材料的屈服强度,最大残余应力发生在沿焊缝方向上,从垂直焊缝方向的残余应力分布曲线可见,在焊缝处横向残余应力发生跳跃变化.
|
| 关 键 词： | 双湿式 搅拌机 底部框架 高斯热源 焊接残余应力 |
The numerical simulation on residual stress of micro-zones of welding line in bottom frame for dual wet mixer |
| |
| YIN Fei-hong
,
GAN Wei-ming
,
DAI Jian-guo.The numerical simulation on residual stress of micro-zones of welding line in bottom frame for dual wet mixer[J].Machinery Design & Manufacture,2012(3):277-279. |
| |
| Authors: | YIN Fei-hong GAN Wei-ming DAI Jian-guo |
| |
| Affiliation: | 1(1Changzhou Institute of Technology,Changzhou 213002,China)(2Changzhou Key Laboratory of Nontraditional Machining,Changzhou 213002,China) |
| |
| Abstract: | It presents a numerical analysis of the welding process for the bottom frame micro-zones of dual wet mixer with ANSYS software.The Gauss thermal source is adopted to simulate GTAW source.And its movement is realized by APDL cycle program,so that the deformation and residual stress field of welding process are obtained.According to the Von Mises equivalent stress contours and the distribution curve of the nodes residual stress in welding micro-zones,the welding residual stress of the whole structure is compressive stress,and its value is much lower than the material yield strength.The maximum residual stress goes with the direction of welding.From the distribution curve of the vertical welding residual stress,it can be seen that the vertical residual stress change randomly in the welding. |
| |
| Keywords: | Dual wet mixer Bottom frame Gauss thermal sources Weld residual stress |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
