Development of WC-Co Coatings Deposited by Warm Spray Process |
| |
Authors: | Pornthep Chivavibul Makoto Watanabe Seiji Kuroda Jin Kawakita Masayuki Komatsu Kazuto Sato Junya Kitamura |
| |
Affiliation: | 1. Composites and Coatings Center, National Institute for Materials Science, Ibaraki, Japan 2. Fujimi Incorporated, Gifu, Japan
|
| |
Abstract: | The high-velocity oxy-fuel (HVOF) process is commonly used to deposit WC-Co coatings. There are some problems with this process; especially the decomposition and decarburization of WC during spraying make a coating brittle. To suppress such degradation, the warm spray (WS) process was applied to deposit WC-Co coatings, which is capable of controlling the flame temperature in the range of 500-2000 °C. The microstructure and phases of the deposited coatings were characterized by using SEM and XRD, and the mechanical properties such as hardness, fracture toughness, and wear properties were also investigated. WS process successfully suppressed the formation of the detrimental phases such as W2C and W, which are usually observed in HVOF coatings. The WS coatings showed the similar trend of the hardness variation for Co content with a sintered bulk material. Improvement of toughness and wear behavior was also observed in WS coatings. |
| |
Keywords: | |
本文献已被 SpringerLink 等数据库收录! |
|