| 基于UG汽车转向器上护罩在逆向设计中的误差分析 |
| |
| 引用本文： | 赵天婵,冯俊,李进雄.基于UG汽车转向器上护罩在逆向设计中的误差分析[J].机械研究与应用,2008,21(2):109-111. |
| |
| 作者姓名： | 赵天婵 冯俊 李进雄 |
| |
| 作者单位： | 江汉大学,湖北,武汉,430056 |
| |
| 摘 要： | 针对采用三坐标测量机对转向器上护罩进行逆向设计后生成的三维模型，通过UG软件建模及分析功能，把建立的模型与该零件原形相比较，进行详细的尺寸误差分析，探讨误差产生的基本原因和减小误差的基本方法，确立了测量方法的正确途径。
|
| 关 键 词： | 逆向工程 三坐标测量机 UG软件 误差分析 |
| 文章编号： | 1007-4414(2008)02-0109-03 |
| 修稿时间： | 2007年11月26 |
Error analysis in converse design of the auto steering pole's envelopes based on UG |
| |
| Zhao Tian-chan,Feng Jun,Li Jin-xiong.Error analysis in converse design of the auto steering pole's envelopes based on UG[J].Mechanical Research & Application,2008,21(2):109-111. |
| |
| Authors: | Zhao Tian-chan Feng Jun Li Jin-xiong |
| |
| Affiliation: | Zhao Tian - chart, Feng Jun, Li Jin - xiong (Jianghan university, Wuhan Hubei 430056, China ) |
| |
| Abstract: | Aiming at auto steering pole＇s envelopes based 3D medel which is created in converse design by the three coordinate measuring machine, the detail dimensions error analysis is included, which is based on the comparison between UG model and part prototype. The basic causes of the error and methods about how to reduce the error are then approached. The correct measuring method is given. |
| |
| Keywords: | converse engineering three coordinate measuring machine UG software error analysis |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
