| 催化裂化汽油加氢脱硫及芳构化(Hydro-GAP)技术的工业试验 |
| |
| 引用本文： | 孙殿成,朱华兴,杨勇刚,玗满初,孙其元,邓勇. 催化裂化汽油加氢脱硫及芳构化(Hydro-GAP)技术的工业试验[J]. 炼油技术与工程, 2010, 40(4) |
| |
| 作者姓名： | 孙殿成 朱华兴 杨勇刚 玗满初 孙其元 邓勇 |
| |
| 作者单位： | 1. 中国石化集团洛阳石油化工工程公司,河南省洛阳市,471003
2. 中国石油化工股份有限公司荆门分公司,湖北省荆门市,448039 |
| |
| 摘 要： | 介绍催化裂化汽油加氢脱硫及芳构化(Hydro-GAP)技术在中国石油化工股份有限公司荆门分公司进行工业试验的情况,结果表明,汽油硫质量分数由800μg/g左右降至150μg/g以下,脱硫率达80%以上;烯烃体积分数由30%左右降至20%左右;汽油研究法辛烷值变化幅度不大,马达法辛烷值提高0.4～0.8,抗爆指数提高0.15～0.75个单位;C_5~+汽油收率为95.44%。Hydro-GAP技术可以生产符合国Ⅲ排放要求的清洁汽油。
|
| 关 键 词： | 催化裂化汽油 加氢脱硫 辛烷值 芳构化 工业试验 |
Commercial tests of hydrodesulfurization and aromatization process for FCC naphtha |
| |
| Sun Diancheng,Zhu Huaxing,Yang Yonggang,Yu Manchu,Sun Qiyuan,Deng Yong. Commercial tests of hydrodesulfurization and aromatization process for FCC naphtha[J]. Petroleum Refinery Engineering, 2010, 40(4) |
| |
| Authors: | Sun Diancheng Zhu Huaxing Yang Yonggang Yu Manchu Sun Qiyuan Deng Yong |
| |
| Affiliation: | 1.SINOPEC Luoyang Petrochemical Engineering Corporation (Luoyang 471003; Henan; China) 2.SINOPEC Jingmen Company(Jingmen 448039; Hubei; China); |
| |
| Abstract: | FCC naphtha hydrodesulfurization and aromatization process(Hydro-GAP) was tested commercially in SINOPEC Jingmen Company.The results showed that the sulfur content in FCC naphtha was re- duced from about 800 ppm to lower than 150 ppm,the desulfurization rate was more than 80%,the olefin content was lowed from about 30%to about 20%,the RON of the treated naphtha was almost the same,the MON and antiknock index were increased by 0.4-0.8 unit and 0.15-0.75 unit respectively,and the yield of C_5~+ fraction was 9... |
| |
| Keywords: | FCC naphtha hydrodesulfurization octane number aromatization commercial test |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
