Adsorption of Cr(VI) on Stipa tenacissima L (Alfa): Characteristics,kinetics and thermodynamic studies

This study aims to remove ionic Cr(IV) from aqueous solution using Stipa tenacissima L as a biomass source. The Arabic name for the plant Stipa tenacissima L is HALFA (ALFA) ; it belongs to the category of biosorbents agro-industrial origin. Stipa tenacissima L is from the center of the province of Djelfa Algeria. This biomass was characterized by various analytical techniques such as scanning electron microscopy, energy dispersive spectroscopy and Fourier-transform infrared spectroscopy. In order to optimize the operating conditions for the determination of ions of Cr(VI), the initial concentration of Cr(VI) ions, temperature, pH of the solution and the solid/liquid ratio were individually studied. According to the results, a fix rate of about 90% was recorded. Optimum biosorption conditions were found to be pH ~1, C_o = 50 mg/L, R = 5 g/L and T = 296 K. It was found that biosorption of Cr(VI) ions onto biomass of Stipa tenacissima L was better suitable to Langmuir model. The correlation coefficients for the second-order kinetic model obtained were found to be 0.996 for all concentrations. These indicate that the biosorption system studied belongs to the second-order kinetic model. Thermodynamics parameters as enthalpy, entropy of system and free energy were evaluated, which confirms the feasibility of the process. An empirical modeling was performed by using a 2⁴ full factorial design, and the regression equation for adsorption chromium (VI) was determined from the data. The initial metal ion concentration has the most positive pronounced effect in increasing the chromium (VI) adsorption, whereas the pH and adsorbent dosage have the most negative effect on the process.