| 数控机床关键点设置的开发与应用 |
| |
| 引用本文： | 马国艳. 数控机床关键点设置的开发与应用[J]. 制造技术与机床, 2021, 0(1): 123-127 |
| |
| 作者姓名： | 马国艳 |
| |
| 作者单位： | 沈阳机床（集团）有限责任公司 |
| |
| 摘 要： | 详细地阐述了在机床数控系统上关键点设置的三种方法,并开发了关键点设置的人机界面,分析了关键点设置的三种方法的利弊,最后提出并分析了关键点位置确认的两种方法.
|
| 关 键 词： | 关键点 数控机床 PLC 软开关 |
Development and application of key point setting of NC machine tool |
| |
| MA Guoyan. Development and application of key point setting of NC machine tool[J]. Manufacturing Technology & Machine Tool, 2021, 0(1): 123-127 |
| |
| Authors: | MA Guoyan |
| |
| Affiliation: | (Shenyang Machine Tool(Group)Co.,Ltd.,Shenyang 110142,CHN) |
| |
| Abstract: | In this paper,three methods of key points setting in NC system are described in detail,it also developed the HMI and analyzed the advantages and disadvantages of three methods of key point setting.Finally,two methods of location confirmation of key points are proposed and analyzed. |
| |
| Keywords: | key point NC machine tool PLC soft switching |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
